Thread Rating:
  • 3 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
vacuum
got a gl1200 interstate. project bike. runs but rough. the vacuum line coming off of intake is missing. cant find a vacuum diagram for it. anyone know where this line goes?
Reply
#1 03-11-2010, 08:25 AM,
[Image: hoses.gif]
Reply
#2 03-11-2010, 08:28 AM,
jayrpdpa,

Welcome to the site!
Reply
#3 03-11-2010, 08:32 AM,
thank you. just what i was looking for. your the man!
Reply
#4 03-11-2010, 09:14 AM,
Welcome to the Site!! 8)
1985 Limited Edition
Reply
#5 03-11-2010, 11:33 PM,
wings are new to me. well road bikes period. big difference to off road. i am learning as i go and the book only give me so much info. so any help i can get will be appreciated.
on two of the carbs where the idle/air screws are, the opposite sides are wide open. if i shine a light in i can see the pins. is that the way thay are suppose to be or is there suppose to be plug or a hose in there.
Reply
#6 03-12-2010, 09:11 AM,
correction.i looked at them again and it wasn't the idle/air pins i was seeing. thay just look like air ports. thay are direcly oppisite of the idle/air screws. the other set of carbs has one with a cap and the other with a vacuum tube. this set is wide open. it almost looks like there is suppose to be a tube joining them together. is there suppose to be a tube there or are thay suppose to be wide open???
Reply
#7 03-12-2010, 09:31 AM,
Welcome!
Reply
#8 03-12-2010, 02:46 PM,


Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html