Thread Rating:
  • 5 Vote(s) - 2.8 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Exhaust gasket (automotive number)
My VTX 1800 uses a standard round, auto gasket. They cost me about $2.50 to $3 at the auto parts store instead of $9 each at the stealer.
Does any one have a cross over # for the 1200 gaskets to a car #
Did a search and could not fine. Don't want to take the bike apart and go on a quest but will if necessary.
Thanks
'84 GL1200 I & '04 VTX 1800 C
Reply
#1 08-03-2007, 09:39 AM,
NDAna Wrote:My VTX 1800 uses a standard round, auto gasket. They cost me about $2.50 to $3 at the auto parts store instead of $9 each at the stealer.
Does any one have a cross over # for the 1200 gaskets to a car #
Did a search and could not fine. Don't want to take the bike apart and go on a quest but will if necessary.
Thanks

well... I saw some on ebay for 9 bucks + 4.95 shiping. :wink:
John McFarland
Chapter Director
GWRRA FL2-W
member 367388
Reply
#2 08-04-2007, 09:26 PM,
I installed a MAC exhaust on my 84 wing and it looks great, the pipes extend about 1.5 inches past the saddle bags,
The exhaust gaskets from the dealer were only $ 3.52 ea.
it's a little louder than factory but looks alot nicer.
Redwing 1984
If everybody subscribed to the theory of an eye for an eye, the world would eventually be blind.
http://usera.imagecave.com/redwing1984/
Reply
#3 10-29-2007, 02:57 PM,


Possibly Related Threads…
Thread Author Replies Views Last Post
  Exhaust Gasket stupid question dwvassar 5 3,570 08-12-2011, 06:08 PM
Last Post: BladeRunner

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | GL1200 GOLDWINGS | Return to Top | | Lite (Archive) Mode | RSS Syndication
google-site-verification: googled4b4fe31e07b65d8.html